Curtain rods wall bracket 16mm - 2-run

This stainless steel window rod makes it possible to attach window curtains to window frames made of wood, plastic and aluminium*. Elegant design in combination with high-quality workmanship guarantee a durable solution for any ambience.*For attaching the window curtain rail to window frames made of aluminium, we recommend the version with adhesive fastening. Length range (selection top right):This selection determines the range in which the desired length is located. The price is calculated according to the selection. For example, if you want to order a length (A) of 78.5cm, you must select the range 70-89cm. Length (A):The window curtain rods are individually made to measure. The "length A" in cm which you must specify when ordering refers to the distance from the centre of the bracket to the centre of the brackets (see illustration). The length A can have one decimal place (mm). Decimal places are neglected or rounded off when selecting the length range. Please note that the specification of length A is required and must be within the selected length range.Otherwise we cannot process your order - there will be no automatic check of the entry! The vitra bar is available with two different fixings Vitra bar with "adhesive fastening Universal and practical - suitable for: Plastic Aluminium Vitra bar with "screw fastening Permanently fixed - suitable for: Plastic Wood

Curtain rod made to measure according to customer requirements Stainless steel curtain rod Ø16mm suitable for our "GS-1" curtain rod system. The curtain rod is custom-made and can be ordered to the millimetre. In order to be able to process your order professionally, we require the correct specification of the length A in cm as well as the design of the two rod ends left and right. The dimension (A) refers to the total length A of the curtain rod in cm, not to the window width! Beforehand, the length range corresponding to length A must be set so that it lies within the selected range! Further below you will find an example of the ordering process. Dividing the curtain rod For logistical reasons, it is necessary to divide the curtain rod centrally or evenly from a certain length. Connection for pitch If the curtain rod has to be divided, this is possible without any problems due to our high-strength connection which is almost seamless. There are no disadvantages in terms of strength and appearance due to this high-quality division. Due to its own weight, an additional holder is always necessary at the latest at the curtain rod division! Otherwise, we recommend a maximum bracket spacing of 200 cm. From when is the curtain pole divided? Here you can see from which lengths the curtain rods are divided: 10 - 239 cm : 1-piece / min. 2 brackets 240 - 479 cm : 2-part / min. 3 holders 480 - 700 cm : 3-part / min. 4 holders Completion types of the "GS-1" curtain rod system Depending on the style and location for which the curtain rod is intended, you can select the appropriate end for both sides in the configurator: Open" end The end type "open" can be used if the curtain rod ends at a wall or the end is not visible for other reasons.(It is not possible to attach our end pieces with this variant). Closed" end The "closed" end type can be used if you prefer a purist look for the curtain rod and do not want to fit an end piece. End cap "for end piece The end type "for end piece" is used to mount the DoMeT® curtain rod end pieces. End "for angle piece The end type "for angle piece" is used to connect two curtain rods by means of an angle piece. Order example: The width of your window is 105.8 cm and you want the curtain rod to protrude 20 cm on both sides. 1. 1. calculate the length (A) Length (A) = 105.8 + 20 + 20 = 145.8 cm 2. select length range (LB) Length range (LB) = 130 - 149(Decimal places are neglected or rounded down when selecting the length range). 3.1 Configure product - length (A) in cm Enter the desired length (A) in cm.(The length A can have one decimal place (mm)). 3.2 Configure product - Endings left & right Select the desired finish type per sidefrom(The length A can have a decimal place for "mm"). Done!

Secure hold & Perfect finish Wall bracket made of stainless steel to hold a ∅16mm curtain rod with 80mm wall spacing. The curtain rod is inserted into the wall bracket and clamped by means of a screw, the matching Allen key is included. The wall bracket is mounted using a central hanger bolt, which ensures easy and universal installation. Spacing of the wall brackets We recommend a maximum bracket spacing of 200cm for our ∅16mm curtain rails. Fixing the curtain rail to roller shutter boxes For mounting the brackets on roller shutter boxes, please use our optional special mounting plate art.no. 2010-3031 (see accessories). Fixing the curtain rod in wood For mounting the holders in wood, please use our optional special mounting plate art.no. 2010-3031 (see accessories).

Wall bracket made of stainless steel to hold a 12mm curtain rod for vertical mounting.The wall bracket allows the curtain rod to be mounted on walls or between soffits. The wall bracket is mounted with a central screw, which ensures easy and universal mounting. The wall bracket has a wall distance of 16mm, so please note that you have to subtract this distance +5mm from the length of the curtain rod. Fixing wall brackets in wood For mounting the brackets in wood, please use our optional special mounting plate art.no. 2010-3031 (see accessories).

Wall bracket made of stainless steel to hold a 16mm curtain rod for vertical mounting.The wall bracket allows the curtain rod to be mounted on walls or between soffits. The wall bracket is mounted with a central screw, which ensures easy and universal mounting. The wall bracket has a wall distance of 16mm, so please note that you have to subtract this distance +5mm from the length of the curtain rod. Fixing wall brackets in wood For mounting the brackets in wood, please use our optional special mounting plate art.no. 2010-3031 (see accessories).